Pengaruh Penggunaan Limbah Ethylene Vinyl Acetate dengan Limbah Polystyrene terhadap Stabilitas dan Marshall Quotient Campuran Beraspal Panas
Downloads
Peningkatan beban lalu lintas dan suhu tinggi di wilayah tropis mempercepat penurunan kinerja perkerasan lentur, sementara akumulasi limbah plastik menjadi permasalahan lingkungan yang terus meningkat. Penelitian ini bertujuan menganalisis pengaruh penggunaan limbah Ethylene Vinyl Acetate (EVA) dan Polystyrene (PS) terhadap karakteristik Marshall campuran beraspal panas serta menentukan komposisi terbaik sebagai bahan modifikasi. Penelitian dilakukan secara eksperimental di laboratorium menggunakan metode Marshall. Kadar Aspal Optimum (KAO) ditentukan melalui variasi kadar aspal 5,0–7,0%, kemudian digunakan untuk membuat campuran termodifikasi dengan variasi komposisi EVA:PS sebesar 100:0, 75:25, 50:50, 25:75, dan 0:100. Parameter yang dianalisis meliputi stabilitas, Flow, dan Marshall Quotient (MQ). Hasil penelitian menunjukkan bahwa KAO diperoleh sebesar 6,0%. Seluruh variasi campuran memenuhi Spesifikasi Umum Bina Marga dengan nilai stabilitas 1154–1586 kg, Flow 3,67–4,07 mm, dan MQ 288–403,1 kg/mm. Komposisi EVA:PS 100:0 menghasilkan kinerja terbaik, sedangkan komposisi 75:25 direkomendasikan sebagai formulasi optimum untuk campuran hibrid karena memberikan keseimbangan terbaik antara kekuatan dan deformasi. Penelitian selanjutnya disarankan melakukan pengujian durabilitas dan performa lapangan untuk mendukung penerapan material ini pada konstruksi jalan berkelanjutan.
Albayati, A. H. (2023). A review of rutting in asphalt concrete pavement. Open Engineering, 13(1). https://doi.org/10.1515/eng-2022-0463
Ashish, P. K., Sreeram, A., Xu, X., Chandrasekar, P., Jagadeesh, A., Adwani, D., & Padhan, R. K. (2023). Closing the Loop: Harnessing waste plastics for sustainable asphalt mixtures – A comprehensive review. Construction and Building Materials, 400, 132858. https://doi.org/10.1016/j.conbuildmat.2023.132858
Chen, W., Zhang, Z., Wei, J., Zhang, X., Gan, C., Wang, W., & Sun, Y. (2025). Research on Mechanical Performance of Porous Asphalt Mixture with High-Viscosity Modified Asphalt. Applied Sciences, 15(7), 3631. https://doi.org/10.3390/app15073631
Cho, S., & Choi, K. (2021). Transport accessibility and economic growth: Implications for sustainable transport infrastructure investments. International Journal of Sustainable Transportation, 15(8), 641–652. https://doi.org/10.1080/15568318.2020.1774946
Deng, Y., & Shi, X. (2023). Modeling the rutting performance of asphalt pavements: a review. Journal of Infrastructure Preservation and Resilience, 4(1), 17. https://doi.org/10.1186/s43065-023-00082-9
Duan, X., Zhai, W., Wang, Y., Sun, K., Wang, X., Hao, P., Meng, X., Gao, Y., & Liang, X. (2024). Effects of adding exogenous microorganisms on nitrogen conversion and its mechanism of action in pig carcass composting. Journal of Cleaner Production, 449, 141734. https://doi.org/10.1016/j.jclepro.2024.141734
Efendy, A., Anjani, P. M., & Chilongola, F. D. (2026). Performance Evaluation of Asphalt Concrete Binder Course Mixtures Modified with Unplasticized Polyvinyl Chloride Waste Powder. Bentang?: Jurnal Teoritis Dan Terapan Bidang Rekayasa Sipil, 14(2), 333–346. https://doi.org/10.33558/bentang.v14i2.12571
Ji, T., Hao, P., She, H., Yang, K., Li, H., Wang, D., Kang, R., & Liu, J. (2023). Durability behavior of asphalt mixtures in regard to material properties and gradation type. Frontiers in Materials, 10. https://doi.org/10.3389/fmats.2023.1151479
Joumblat, R., Al Basiouni Al Masri, Z., Al Khateeb, G., Elkordi, A., El Tallis, A. R., & Absi, J. (2023). State-of-the-Art Review on Permanent Deformation Characterization of Asphalt Concrete Pavements. Sustainability, 15(2), 1166. https://doi.org/10.3390/su15021166
Kumar, P., & Shukla, S. (2022). Flexible pavement construction using different waste materials: A review. Materials Today: Proceedings, 65, 1697–1702. https://doi.org/10.1016/j.matpr.2022.04.713
Kurniasari, F. D., Pramanda, H., & Muarif, M. A. (2025). Pemanfaatan Limbah Plastik Low Density Polyethylene (LDPE) sebagai substitusi Terhadap Campuran Aspal PEN 60/70. Teras Jurnal?: Jurnal Teknik Sipil, 15(1), 49–60. https://doi.org/10.29103/tj.v15i1.1201
Latif, A., & Setiawan, A. (2023). Pengaruh Penambahan Plastik High Density Polyethylene (HDPE) dan Low Density Polyethylene (LDPE) Terhadap Karakteristik Campuran Aspal AC-WC Menggunakan Metode Kering. Sainteks, 20(2), 153–165. https://doi.org/10.30595/sainteks.v20i2.17200
Li, H., Han, Y., Guangxun, E., Sun, Y., Wang, L., Liu, X., Ren, J., & Lin, Z. (2024). Recycling of waste polyethylene in asphalt and its performance enhancement methods: A critical literature review. Journal of Cleaner Production, 451, 142072. https://doi.org/10.1016/j.jclepro.2024.142072
Ma, Y., Zhou, T., Song, H., & Zhang, H. (2023). Investigation of the Rheological Properties and Storage Stability of Waste Polyethylene/Ethylene–Vinyl Acetate-Modified Asphalt with Crosslinking and a Silicone Coupling Agent. Materials, 16(9), 3289. https://doi.org/10.3390/ma16093289
Milad, A., Babalghaith, A. M., Al-Sabaeei, A. M., Dulaimi, A., Ali, A., Reddy, S. S., Bilema, M., & Yusoff, N. I. M. (2022). A Comparative Review of Hot and Warm Mix Asphalt Technologies from Environmental and Economic Perspectives: Towards a Sustainable Asphalt Pavement. International Journal of Environmental Research and Public Health, 19(22), 14863. https://doi.org/10.3390/ijerph192214863
Mohammadi, R., & Ameri, M. (2024). A systematic review on sustainable utilization of plastic waste in asphalt: assessing environmental and health impact, performance, and economic viability. Environmental Science and Pollution Research, 31(54), 62676–62701. https://doi.org/10.1007/s11356-024-35395-z
Nizamuddin, S., Boom, Y. J., & Giustozzi, F. (2021). Sustainable Polymers from Recycled Waste Plastics and Their Virgin Counterparts as Bitumen Modifiers: A Comprehensive Review. Polymers, 13(19), 3242. https://doi.org/10.3390/polym13193242
Nugroho, M. S. (2019). KARAKTERISTIK MARSHALL QUOTIENT PADA HOT MIX ASPHALT MENGGUNAKAN AGREGAT ALAM SUNGAI OPAK. INERSIA: LNformasi Dan Ekspose Hasil Riset Teknik SIpil Dan Arsitektur, 15(2), 84–91. https://doi.org/10.21831/inersia.v15i2.28627
Oguntayo, D., Ogundipe, O., Aladegboye, O., Ogunkunbi, G., Babatunde, Y., & Aransiola, O. (2023). Performance Evaluation of Hospital Waste Ash-Modified Asphalt Mixtures. Advances in Civil Engineering, 2023, 1–7. https://doi.org/10.1155/2023/6880766
Othman, K. (2022). Prediction of the hot asphalt mix properties using deep neural networks. Beni-Suef University Journal of Basic and Applied Sciences, 11(1), 40. https://doi.org/10.1186/s43088-022-00221-3
Pan, J., Li, J., Shan, B., Yao, Y., & Huang, C. (2025). A Comprehensive Review of Applications and Environmental Risks of Waste Plastics in Asphalt Pavements. Materials, 18(15), 3441. https://doi.org/10.3390/ma18153441
Pribadi, G., Indriasari, I., & Rahman, R. L. (2023). Analisis Subtitusi Limbah Plastik (LDPE) terhadap Karakteristik Marshall Pada Campuran Laston AC-WC. JURNAL KRIDATAMA SAINS DAN TEKNOLOGI, 5(02), 334–347. https://doi.org/10.53863/kst.v5i02.945
Riwibowo, N., Sentauri Cahyaningrum, F., Tama, T. F., & Amelia, F. (2023). Pengaruh Suhu Perkerasan Terhadap Umur Perkerasan Lentur Menggunakan Metode Analitis. Rekayasa, 16(2), 204–211. https://doi.org/10.21107/rekayasa.v16i2.19043
Santos, G., Esmizadeh, E., & Riahinezhad, M. (2024). Recycling Construction, Renovation, and Demolition Plastic Waste: Review of the Status Quo, Challenges and Opportunities. Journal of Polymers and the Environment, 32(2), 479–509. https://doi.org/10.1007/s10924-023-02982-z
Shah, P. M. (2025). Study on use of recycled waste materials on the performance of asphalt binder and mixes: A comprehensive review. Progress in Rubber, Plastics and Recycling Technology, 41(4), 409–439. https://doi.org/10.1177/14777606241290857
Shah, S. K., Gao, Y., & Abdelfatah, A. (2025). Plastic-Waste-Modified Asphalt for Sustainable Road Infrastructure: A Comprehensive Review. Sustainability, 17(21), 9832. https://doi.org/10.3390/su17219832
Singh, A., & Gupta, A. (2024). Upcycling of plastic waste in bituminous mixes using dry process: Review of laboratory to field performance. Construction and Building Materials, 425, 136005. https://doi.org/10.1016/j.conbuildmat.2024.136005
Singh, N., & Walker, T. R. (2024). Plastic recycling: A panacea or environmental pollution problem. Npj Materials Sustainability, 2(1), 17. https://doi.org/10.1038/s44296-024-00024-w
Ullah, S., Qabur, A., Ullah, A., Aati, K., & Abdelgiom, M. A. (2024). Enhancing High-Temperature Performance of Flexible Pavement with Plastic-Modified Asphalt. Polymers, 16(17), 2399. https://doi.org/10.3390/polym16172399
Wang, B., Yan, L., Fu, Q., & Kasal, B. (2021). A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete. Resources, Conservation and Recycling, 171, 105565. https://doi.org/10.1016/j.resconrec.2021.105565
Wikurendra, E. A., Csonka, A., Nagy, I., & Nurika, G. (2024). Urbanization and Benefit of Integration Circular Economy into Waste Management in Indonesia: A Review. Circular Economy and Sustainability, 4(2), 1219–1248. https://doi.org/10.1007/s43615-024-00346-w
Ye, Z., & Zhao, Y. (2023). Polyolefin Elastomer Modified Asphalt: Performance Characterization and Modification Mechanism. Buildings, 13(5), 1291. https://doi.org/10.3390/buildings13051291
Copyright (c) 2026 Aulia Muttaqin, Anwar Efendy, Adiman Fariyadin, Lalu M. Farid Nabih

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.





